/
LPC55Sxx - FlashPro-ARM - GangPro-ARM - Debug Authentication

LPC55Sxx - FlashPro-ARM - GangPro-ARM - Debug Authentication

Preparing the environment for debug authentication protocol.

You must have the files/data prepared:

  • Debug Credential Certificate (.dc),

  • Private Key for debug (.pem).

The file preparation procedure is described in the "AN13037" - LPC55Sxx Debug Authentication.

 Instructions

  • Open FlashPro-ARM / GangPro-ARM.

  • Select the appropriate “Microcontroller Type”. Only LPC55Sxx can use the Debug Authentication.

  • Open “Setup” => “Memory Protection”.

  • Check “Debug with “Debug Authentication” procedure”.

  • Select the necessary files using the "Open Debug Credential File" and "Open Private Key File" buttons. Click “OK”.

  • Click “VERIFY ACCESS”.

Related content

LPC55Sxx - FlashPro-ARM - GangPro-ARM - Secure Binary
LPC55Sxx - FlashPro-ARM - GangPro-ARM - Secure Binary
More like this
Debug Authentication for STM32H503
Debug Authentication for STM32H503
More like this
Debug Authentication for STM32H563/573 TrustZone® disabled
Debug Authentication for STM32H563/573 TrustZone® disabled
More like this
S32K3xx - Security Guide
S32K3xx - Security Guide
More like this
Custom Buffer Write and Verify - GangPro-ARM
Custom Buffer Write and Verify - GangPro-ARM
More like this
LPC55Sxx - Preparing files for programming (Secure Binary)
LPC55Sxx - Preparing files for programming (Secure Binary)
More like this