Open

https://elprotronic.atlassian.net/wiki/spaces/FPGPARM/pages/1165885442

FlashPro-X and GangPro-X Device List Overview

These devices can be programmed by all adapters:

• Texas Instruments - MSPM0, MSP432, TIVA, C2000, Stellaris, SimpleLink (ARM only - CC13xx, CC26xx, CC32xx)

• ST Microelectronics - STM32 Fx, Lx, Gx, Hx, BlueNRG, WB, WL, Ux, NX, STSPIN32F

• Silicon Labs - EFM32, EFR32, EM, SiM3

• Silergy - MAX7xxxx

• Renesas - Synergy, RA

• NXP / Freescale - i.MX RT, Kinetis, LPC, x32

• Nordic Semiconductors - nRF

• Microchip/Atmel - SMART SAMx

• Maxim - MAX32xxx

• Marvell - 88M

• GigaDevice - GD32-E23x, GD32Fxxx

• Infineon / Cypress - FM0+, FM3, FM4, PSoC 4, PSoC 5LP, PSoC 6, PSoCAn

• Analog Devices - Precision

• Active Semi - PAC5x

Serial Flash Support Overview

Using FlashPro-ARM and GangPro-ARM software the XStreamPro-Iso adapter can use the target MCU (i.e. STM32H7) as a proxy to program these serial external flash devices over JTAG/SWD, as long as the external flash device is properly configured using the MCU’s SPI peripheral interface, such as OCTOSPI, Dual-QSPI, QSPI, SPI, etc. No additional external connections necessary aside from JTAG/SWD.

NOR memory:

• Adesto

• Cypress

• GigaDevice

• ISSI

• Macronix

• Microchip

• Micron

• Winbond

Serial Flash memory can also be programmed directly via SPI using FlashPro-M or GangPro-M software.

Open

Open

https://elprotronic.atlassian.net/wiki/spaces/FPGPARM/pages/1165885442