Memory Protection Configuration

Owned by Adam Czajkowski
Last updated: Oct 14, 2021
1 min read

Configuration options specified in this section can be configured visually using the GUI dialog under Setup->Memory Protection. None of the options in this section will be used unless “WriteLockingBitsEn” is enabled. The “WriteLockingBitsEn” can also be visually set in the main GUI window, Memory Protection, Enable check box.

1. “WriteLockingBitsEn”

This option specifies whether memory protection and debug access locations should be modified. If disabled, functions such as F AutoProgram will only program code to Main Flash, OTP/INFO/EEPROM Memory, and External Flash. If disabled, the functions F_Lock_MCU, F_Write_Locking_Registers and F_Write_Debug_Register will not do anything.

Logically grouped together with all parameters in this section.

  • 1 : enabled

  • 0 : disabled (default)