The first startup of NXP-Flasher shows a window with default settings. After you adjust the settings to your needs and close the application, the settings will be saved in the configuration file. This allows retaining previous settings after restarting the application.
It is possible to save many more configuration files to the location you specify. It is possible to recreate a given configuration by loading a previously saved configuration.
Configuration file content
The configuration file mainly contains parameters for commands sent to the MCU bootloader or Flashloader
The table below shows the list of parameters that are in the configuration file:
Parameter | Limitation/Range | Description | Usage |
|---|---|---|---|
Flashloader_FileName | supported files: .bin | Absolute path to Flashloader binary file | |
Image_FileName | supported files: .bin, .s19, .sb | Absolute path to Image file | |
OTP_FileName | supported files: .json, .bin | Absolute path to fuse data file for OTP memory | |
MCU_name | supported families: RT10xx, RT11xx | ||
Target_EN | 0-255 | ||
Interface | USB HID only | Host computer connection interface with target MCU | |
OTP_WrAutoProgramEn | 0 or 1 | ||
OTP_LockAutoProgramEn | 0 or 1 | ||
Flashloader_Default_Setup | 0 or 1 | Flashloader settings relate to the load address, jump address, and binary file. This option means choosing between the settings: 1 - default 0 - user defined | |
UserMemoryOptions | 0 or 1 | Selection of address ranges for read delete and write operations. 0 - Defined by image file, 1 - User defined | |
EraseAll | 0 or 1 | ||
Boot_Dev_Type | 0,1,2 | 0 - Nor Flash | |
Memory_Configuration_Address | Load Address for Memory_Configuration_Word1 | F_MemoryConfig() | |
Memory_Configuration_Word1 | External Flash configuration word | F_MemoryConfig() | |
Memory_Configuration_Word2 | External Flash configuration word2 | F_MemoryConfig() | |
Memory_ID | 0 … 0xFF | External memory ID | F_MemoryConfig() |
Memory_Size | |||
Property_Tag | 0 … 0x20 | F_GetProperty() | |
Property_Value | 0x0000 0000 … 0xFFFF FFFF | F_SetProperty() | |
Read_Start_Address | 0x0000 0000 … 0xFFFF FFFE | Read memory start address. | F_Read() if UserMemoryOptions = 1 |
Read_Stop_Address | 0x0000 0001 … 0xFFFF FFFF | Read memory end address | F_Read() if UserMemoryOptions = 1 |
Write_Erase_Start_Address | 0x0000 0000 … 0xFFFF FFFE | Start address for Eraase and Write operations | F_Erase() if(UserMemoryOptions == 1 and EraseAll ==0) |
Write_Erase_Stop_Address | 0x0000 0001 … 0xFFFF FFFF | End address for Eraase and Write operations | F_Erase() if(UserMemoryOptions == 1 and EraseAll ==0) |
Flashloader_Load_Address | Internal RAM address range | ||
Flashloader_Jump_Address | Internal RAM address range | ||
Flashloader_VID | 0x0000 … 0xFFFF | USB Vendor ID of Flashloader running in MCU | F_Connect(), F_Load_OS() if (Flashloader_Default_Setup == 0) |
Flashloader_PID | 0x0000 … 0xFFFF | USB Product ID of Flashloader running in MCU | F_Connect(), F_Load_OS() if (Flashloader_Default_Setup == 0) |
MCU_VID | 0x0000 … 0xFFFF | USB Vendor ID of MCU | |
MCU_PID | 0x0000 … 0xFFFF | USB Vendor ID of MCU |