Prerequisites
Configuration file
In order to run the example project on the microcontroller you have, you will need a configuration file for the programmer. The easiest and fastest way is to use FlashPro-ARM GUI. In the "Microcontroller Type" area select the appropriate model and check "Verify Access" if the connection works.
...
If the communication was successful then confirmation is in the report window. Then save the configuration File → Save Setup as…
The generated file will be used in the function: F_ConfigFileLoad(“config_file_path.cfg“)
...
Sequence
F_OpenInstancesAndFPAs
F_Set_FPA_index
F_Initialization
F_ConfigFileLoad
F_Open_Target_Device
... < sequential functions here > ...
F_Close_Target_Device
...