Skip to end of banner
Go to start of banner

Auto Program Preparation

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 2 Current »

Gangflasher-N allows importing a list of commands from a .bat file produced in MCUXpresso Secure Provisioning provided by NXP.

https://www.nxp.com/design/software/development-software/mcuxpresso-software-and-tools-/mcuxpresso-secure-provisioning-tool:MCUXPRESSO-SECURE-PROVISIONING

Successful configuration allows programming and creation of write_image_win.bat file

The sample file content which is shown below contains a list of commands used in IMXRT programming.

The command list can be imported into Gangflasher-N in the Auto Program window.

Once imported, the paths to the files may need to be fixed. This can be done by selecting the command from the list , fix the path in the dedicated field and overwrite the command.

  1. Select the command from the list in which you want to correct the path

  2. Click browse and look for the file in the appropriate path.

  3. Overwrite command.

  4. Save the configuration file

  5. Click “OK” button to complete the autoprogram configuration

In the main window, execute the “AUTO PROG. (F8)”

  • No labels