Sequential Functions

Owned by Adam Czajkowski
Last updated: Feb 10, 2023
18 min read

Sequential functions allow access to the target device in any combination of small instructions like erase, read, write sector, modify part of memory, etc. Sequential functions work correctly after communication between target device and programming adapter has been initialized. This requires the target FPA to be opened using F_OpenInstancesAndFPAs and F Initialization, and for proper configuration options to be set using Generic Functions | F_ConfigFileLoad or Generic Functions | F_Set_Config_Value_by_Name.

Once the FPA has been initialized using the aforementioned functions, open the target device using the function Sequential Functions | F_Open_Target_Device. When communication is established, then any of the sequential instructions can be called. When finished, conclude your task by calling Sequential Functions | F_Close_Target_Device.

NOTE: Sequential Functions | F_Open_Target_Device is a high overhead function (usually around one second of execution time). Therefore call Sequential Functions | F_Open_Target_Device only once and perform all sequential functions before closing the target with Sequential Functions | F_Close_Target_Device. Sample code sequence:

F_OpenInstancesAndFPAs("*# *");//only first FPA F_Set_FPA_index(1); //select FPA 1 F_Initialization(); //initialize selected FPA(s) F_ConfigFileLoad(<config file path>); //load config file to selected FPA(s) F_Open_Target_Device(); //power on, initialize JTAG/SWD communication, calib clk ... < all sequential functions here > ... F_Close_Target_Device(); //power off

 

1. F_Open_Target_Device

General Description

The FPA will establish communication with the target device(s). This step requires a working connection, a read of the processor ID, RAM size, and flash size checked against internal records (except when target MCU doesn’t have this meta-data available), and calibration of internal CPU clock. If these steps match expected values the operation will succeed.

This function has some exclusive GangPro-M return values.

Syntax

INT_X F_Open_Target_Device( void );

Input

none.

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index , index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : result of operation

  • FALSE (0) : failed

  • FlashPro-M - TRUE (1) : succeeded

  • GangPro-M - TRUE MASK (0x01..0x3F) : 0x01 - target 1, 0x02 - target 2, 0x04 - target 3, 0x08 - target
    4, 0x10 - target 5, 0x20 - target 6

  • FPA_UNMATCHED_RESULTS (-1 or 0xFFFFFFFF) : Result of operation inconsistent across all selected FPAs, refer to Multi API-DLL Functions | F_LastStatus

  • FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range

 

2. F_Close_Target_Device

General Description

Terminates communication between FPA and target device. Sets reset line to GND and communication lines (TMS, TCK, TDI) to configuration setting “ReleaseJtagState”.

This function has some exclusive GangPro-M return values.

Syntax

INT_X F_Close_Target_Device( void );

Input

none.

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index , index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : result of operation

  • FALSE (0) : failed

  • FlashPro-M - TRUE (1) : succeeded

  • GangPro-M - TRUE MASK (0x01..0x3F) : 0x01 - target 1, 0x02 - target 2, 0x04 - target 3, 0x08 - target
    4, 0x10 - target 5, 0x20 - target 6

  • FPA_UNMATCHED_RESULTS (-1 or 0xFFFFFFFF) : Result of operation inconsistent across all selected FPAs, refer to Multi API-DLL Functions | F_LastStatus

  • FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range

3. F_Segment_Erase

General Description

Send command to erase target device’s memory segment.

This function has some exclusive GangPro-M return values.

Syntax

Input

INT_X address : address of segment/sector to be erased

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : result of operation

  • FALSE (0) : failed

  • FlashPro-M - TRUE (1) : succeeded

  • GangPro-M - TRUE MASK (0x01..0x3F) : 0x01 - target 1, 0x02 - target 2, 0x04 - target 3, 0x08 - target
    4, 0x10 - target 5, 0x20 - target 6

  • STATUS_ADDRESS_OUT_OF_FLASH_SPACE_ERR (534) : address out of range

  • STATUS_ERASE_SEGMENT_FAILED (549) : erase operation failed

  • FPA_UNMATCHED_RESULTS (-1 or 0xFFFFFFFF) : Result of operation inconsistent across all selected FPAs, refer to Multi API-DLL Functions | F_LastStatus

  • FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range

4. F_Sectors_Blank_Check

General Description

Blank check part or all of the target device’s memory.

This function has some exclusive GangPro-M return values.

Syntax

Input

INT_X start_addr : first memory address to be included in blank check (inclusive)
INT_X stop_addr : last memory address to be included in blank check (inclusive)

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

INT_X : result of operation

  • FALSE (0) : failed

  • FlashPro-M - TRUE (1) : succeeded

  • GangPro-M - TRUE MASK (0x01..0x3F) : 0x01 - target 1, 0x02 - target 2, 0x04 - target 3, 0x08 - target
    4, 0x10 - target 5, 0x20 - target 6

  • FPA_UNMATCHED_RESULTS (-1 or 0xFFFFFFFF) : Result of operation inconsistent across all selected FPAs, refer to Multi API-DLL Functions | F_LastStatus

  • FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range

5. F_Copy_Buffer_to_Flash

General Description

Write specified number of bytes from Write Buffer in FlashPro-M Data Buffer Functions | FlashPro-M-buffers or GangPro-M Data Buffer Functions | GangPro-M-buffers to target flash.

This function has some exclusive GangPro-M return values.

Syntax

Input

INT_X start_addr : valid flash address
INT_X size : number of bytes to copy beginning at start address

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : result of operation

  • FALSE (0) : failed

  • FlashPro-M - TRUE (1) : succeeded

  • GangPro-M - TRUE MASK (0x01..0x3F) : 0x01 - target 1, 0x02 - target 2, 0x04 - target 3, 0x08 - target
    4, 0x10 - target 5, 0x20 - target 6

  • FPA_UNMATCHED_RESULTS (-1 or 0xFFFFFFFF) : Result of operation inconsistent across all selected FPAs, refer to Multi API-DLL Functions | F_LastStatus

  • FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range

Example

Custom Buffer Write and Verify - FlashPro-M

6. F_Copy_Flash_to_Buffer (FlashPro-M only)

General Description

Read specified number of bytes from MCU flash to Read Data Buffer in FlashPro-M Data Buffer Functions | FlashPro-M-buffers.

Syntax

Input

INT_X start_addr : valid flash address
INT_X size : number of bytes to copy beginning at start address

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : result of operation

Example

Refer to Sequential Functions | F_Copy_Buffer_to_Flash.

7. F_Copy_Gang_Buffer_to_Flash (GangPro-M only)

General Description

Write specified number of bytes from Gang Write Buffer in GangPro-M Data Buffer Functions | GangPro-M-buffers to target flash.

Syntax

Input

INT_X start_addr : valid flash address
INT_X size : number of bytes to copy beginning at start address

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : result of operation

Example

Custom Buffer Write and Verify - GangPro-M

8. F_Copy_Flash_to_Gang_Buffer (GangPro-M only)

General Description

Read specified number of bytes from targets' MCU flash to Gang Read Buffers in GangPro-M Data Buffer Functions | GangPro-M-buffers.

Syntax

Input

INT_X start_addr : valid flash address
INT_X size : number of bytes to copy beginning at start address

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : result of operation

Example

Refer to Sequential Functions | F_Copy_Gang_Buffer_to_Flash.

9. F_Write_Byte_to_RAM

General Description

Use the FPA to write a byte to the target device(s) RAM. This write is not verified (no read performed). Use F_Read_Byte (FlashPro-M) or F_Gang_Read_Byte (GangPro-M) to verify.

This function has some exclusive GangPro-M return values.

Syntax

Input

INT_X addr : address of byte to be written (byte addressable)
BYTE data : byte to be written

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : result of operation

  • FALSE (0) : failed

  • FlashPro-M - TRUE (1) : succeeded

  • GangPro-M - TRUE MASK (0x01..0x3F) : 0x01 - target 1, 0x02 - target 2, 0x04 - target 3, 0x08 - target
    4, 0x10 - target 5, 0x20 - target 6

  • FPA_UNMATCHED_RESULTS (-1 or 0xFFFFFFFF) : Result of operation inconsistent across all selected FPAs, refer to Multi API-DLL Functions | F_LastStatus

  • FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range

10. F_Write_Word16_to_RAM

General Description

Use the FPA to write two bytes to the target device(s) RAM. This write is not verified (no read performed). Use F_Read_Word16 (FlashPro-M) or F_Gang_Read_Word16 (GangPro-M) to verify.

This function has some exclusive GangPro-M return values.

Syntax

Input

INT_X addr : address of 16-bit data to be written (byte addressable)
INT_X data : 16-bit data to be written

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : result of operation

  • FALSE (0) : failed

  • FlashPro-M - TRUE (1) : succeeded

  • GangPro-M - TRUE MASK (0x01..0x3F) : 0x01 - target 1, 0x02 - target 2, 0x04 - target 3, 0x08 - target
    4, 0x10 - target 5, 0x20 - target 6

  • FPA_UNMATCHED_RESULTS (-1 or 0xFFFFFFFF) : Result of operation inconsistent across all selected FPAs, refer to Multi API-DLL Functions | F_LastStatus

  • FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range

11. F_Write_Word32_to_RAM

General Description

Use the FPA to write four bytes to the target device(s) RAM. This write is not verified (no read performed). Use F_Read_Word32 (FlashPro-M) or F_Gang_Read_Word32 (GangPro-M) to verify.

This function has some exclusive GangPro-M return values.

Syntax

Input

INT_X addr : address of 32-bit data to be written (byte addressable)
INT_X data : 32-bit data to be written

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : result of operation

  • FALSE (0) : failed

  • FlashPro-M - TRUE (1) : succeeded

  • GangPro-M - TRUE MASK (0x01..0x3F) : 0x01 - target 1, 0x02 - target 2, 0x04 - target 3, 0x08 - target
    4, 0x10 - target 5, 0x20 - target 6

  • FPA_UNMATCHED_RESULTS (-1 or 0xFFFFFFFF) : Result of operation inconsistent across all selected FPAs, refer to Multi API-DLL Functions | F_LastStatus

  • FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range

12. F_Write_Bytes_Block_to_RAM

General Description

Use the FPA to write a block of bytes to RAM. Currently this function only writes a block of bytes with a size that is a multiple of four, to a 32-bit word aligned address. These writes are not verified (no reads performed). Use F_Read_Bytes_Block (FlashPro-M) or F_Gang_Read_Bytes_Block (GangPro-M) to verify.

This function has some exclusive GangPro-M return values.

Syntax

Input

INT_X addr : address of 32-bit data to be written (byte addressable)
INT_X size : number of bytes to be written
BYTE *data : array of bytes to be written (not verified)

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : result of operation

  • FALSE (0) : failed

  • FlashPro-M - TRUE (1) : succeeded

  • GangPro-M - TRUE MASK (0x01..0x3F) : 0x01 - target 1, 0x02 - target 2, 0x04 - target 3, 0x08 - target
    4, 0x10 - target 5, 0x20 - target 6

  • STATUS ADDR ALIGNMENT ERROR (543) : not 32-bit word aligned address

  • STATUS SIZE ALIGNMENT ERROR (544) : number of bytes not a multiple of four

  • FPA_UNMATCHED_RESULTS (-1 or 0xFFFFFFFF) : Result of operation inconsistent across all selected FPAs, refer to Multi API-DLL Functions | F_LastStatus

  • FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range

13. F_Read_Byte (FlashPro-M only)

General Description

Use the FPA to read one byte from any address (RAM, flash, etc.).

Syntax

Input

INT_X addr : address of byte to be read

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : data read

14. F_Read_Word16 (FlashPro-M only)

General Description

Use the FPA to read two bytes from any address (RAM, flash, etc.).

Syntax

Input

INT_X addr : address of 16-bit word to be read

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : data read

15. F_Read_Word32 (FlashPro-M only)

General Description

Use the FPA to read four bytes from any address (RAM, flash, etc.).

Syntax

Input

INT_X addr : address of 32-bit word to be read

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : data read

16. F_Read_Bytes_Block (FlashPro-M only)

General Description

Use the FPA to read a block of bytes from any address (RAM, flash, etc.).

Syntax

Input

INT_X addr : first byte address to be read (byte addressable)
INT_X size : number of bytes to be read
BYTE *data : array of bytes that will be written with memory contents

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64.

Output

INT_X : result of operation

17. F_Gang_Read_Byte (GangPro-M only)

General Description

Use the FPA to read one byte from any address (RAM, flash, etc.).

Syntax

Input

BYTE target no : MCU target number 1 to 6
INT_X addr : address of byte to be read

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : data read

18. F_Gang_Read_Word16 (GangPro-M only)

General Description

Use the FPA to read two bytes from any address (RAM, flash, etc.).

Syntax

Input

BYTE target no : MCU target number 1 to 6
INT_X addr : address of 16-bit word to be read

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : data read

19. F_Gang_Read_Word32 (GangPro-M only)

General Description

Use the FPA to read four bytes from any address (RAM, flash, etc.).

Syntax

Input

BYTE target no : MCU target number 1 to 6
INT_X addr : address of 32-bit word to be read

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : data read

20. F_Gang_Bytes_Block (GangPro-M only)

General Description

Use the FPA to read a block of bytes from any address (RAM, flash, etc.).

Syntax

Input

INT_X addr : first byte address to be read (byte addressable)
INT_X size : number of bytes to be read
BYTE data[][GANG SIZE] : array of bytes that will be written with memory contents

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64.

Output

INT_X : result of operation

21. F_Write_Locking_Registers

General Description

Write to non-volatile memory protection bits, option bytes, and/or persistent user-data registers (if supported). Does not block communication over debug interface, but can disable writing and/or reading from target device’s memory. These option bytes can be reset to factory settings using the Encapsulated Functions | F_Clear_Locked_Device function if the device supports it. To write protection bits, the Memory Protection Configuration | WriteLockingBitsEn configuration option has to be enabled. To control the exact data that is program, consult in detail the Main FP/GP M GUI->Setup->Memory protection, or section 2. Configuration and select the correct MCU vendor.

This function has some exclusive GangPro-M return values.

Syntax

Input

none.

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : result of operation

  • FALSE (0) : failed

  • FlashPro-M - TRUE (1) : succeeded

  • GangPro-M - TRUE MASK (0x01..0x3F) : 0x01 - target 1, 0x02 - target 2, 0x04 - target 3, 0x08 - target
    4, 0x10 - target 5, 0x20 - target 6

  • FPA_UNMATCHED_RESULTS (-1 or 0xFFFFFFFF) : Result of operation inconsistent across all selected FPAs, refer to Multi API-DLL Functions | F_LastStatus

  • FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range

22. F_Write_Debug_Register

General Description

Write to non-volatile protection bits, or option bytes to disable communication over debug interface. These bits can be reset to factory settings using the Encapsulated Functions | F_Clear_Locked_Device function if the device supports it. To disable debug access, the Memory Protection Configuration | WriteLockingBitsEn configuration option has to be enabled. To control the exact data that is program, consult in detail the Main FP/GP M GUI->Setup->Memory protection, or section 2. Configuration and select the correct MCU vendor.

This function has some exclusive GangPro-M return values.

Syntax

Input

none.

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : result of operation

  • FALSE (0) : failed

  • FlashPro-M - TRUE (1) : succeeded

  • GangPro-M - TRUE MASK (0x01..0x3F) : 0x01 - target 1, 0x02 - target 2, 0x04 - target 3, 0x08 - target
    4, 0x10 - target 5, 0x20 - target 6

  • FPA_UNMATCHED_RESULTS (-1 or 0xFFFFFFFF) : Result of operation inconsistent across all selected FPAs, refer to Multi API-DLL Functions | F_LastStatus

  • FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range

23. F_Get_MCU_Data

General Description

Return the actual MCU ID, flash size, and/or RAM size read by the FPA from target, if supported by vendor.

This function has some exclusive GangPro-M input values.

Syntax

Input

INT_X type : select type of information to receive

  • GET_MCU_ID (1) : connected MCU package identifier (MCU family and group, etc.), not a unique silicon ID

  • GET_MCU_FLASH_SIZE (2) : connected MCU flash size, if available

  • GET_MCU_RAM_SIZE (3) : connected MCU RAM size, if available

  • GET_MCU_TARGET_1 (0x10) : read from target 1, OR with type of info. requested (GangPro-M only)

  • GET_MCU_TARGET_2 (0x20) : read from target 2, OR with type of info. requested (GangPro-M only)

  • GET_MCU_TARGET_3 (0x30) : read from target 3, OR with type of info. requested (GangPro-M only)

  • GET_MCU_TARGET_4 (0x40) : read from target 4, OR with type of info. requested (GangPro-M only)

  • GET_MCU_TARGET_5 (0x50) : read from target 5, OR with type of info. requested (GangPro-M only)

  • GET_MCU_TARGET_6 (0x60) : read from target 6, OR with type of info. requested (GangPro-M only)

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : result of operation

24. F_Capture_PC_Addr

General Description

Read program counter (PC) register using debug interface.

Syntax

Input

none.

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : result of operation

25. F_Get_Targets_Result (GangPro-M only)

General Description

Return per-target success result for encapsulated functions. An error mask can be produced by
subtracting F_Get_Targets_Result() from F_Get_Active_Targets_Mask().

Syntax

Input

none.

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : result of operation

26. F_Get_Active_Targets_Mask (GangPro-M only)

General Description

Return per-target active status. Set intended target mask using: Generic Functions | F_Set_Config_Value_By_Name. Value returned by this function is updated during communication initialization, after any encapsulated function or Sequential Functions | F_Open_Target_Device . An error mask can be produced by subtracting F_Get_Targets_Result() from F_Get_Active_Targets_Mask().

Syntax

Input

none.

 

Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).

Output

INT_X : result of operation