S-GANG & C-Gang Manual
This document provides an introduction to the S-GANG & C-GANG programmers and a detailed description of its hardware architecture, target connection options, and operating modes, including Interactive and Standalone modes. It also explains the programmer's key features, configuration options, and typical production programming workflows.
S-Gang vs. C-Gang
Features | S-GANG | C-GANG |
|---|---|---|
| | |
Data transfer speed to / from Target Device | Up to 1 Mbytes/s | |
JTAG / SWD Hi Speed | Prog. 1-15 MHz | |
JTAG / SWD Med / Low Speed | Hi Speed divided by 2 or 4 | |
Supported Comm. Interfaces (vary by software) | JTAG, cJTAG, SWD, SBW, BSL, DD, SPI, UART | |
Maximum Target MCUs | up to 8 | up to 6 |
DLL for debugging | NO | ARM (CMSIS-DAP IAR/Keil) |
Galvanic Isolation between PC and Target Device | YES | NO |
Standalone mode | YES – from internal memory and SD | |
Quota | NO | YES (default 500) |
Internal Image Memory ( for Standalone, Security ) | 120 MB Flash | 8 MB Flash |
Blow security fuse for MSP430F1xx,2xx,4xx (Vpp 7V) | YES | NO |
Vcc and I/O range | 1.65 - 5.2 V | |
Vcc supplied from Adapter to Target Device | 1.7–5.2 V, up to 150 mA per target | 1.7-5.2 V, up to 200mA in total at Vcc 3.3V |
Icc Current measurements | NO | |
Communication via USB 2.0 | YES – Full and High Speed | |
Communication via LAN (Ethernet) | YES | NO |
Adapter powered from | External power adapter 6-14V | USB DC +5V |
Display results | On PC (Interactive Mode) and Color LCD Display 320x240 (Interactive & Standalone modes) | |
I/O lines in 3-state | YES. Pullup 1M to Vcc | |
Up to 64 adapters can be connected to one PC | YES | |
FCC / CE test certification | YES | |
OS | Windows TM 32,64-b applications, Linux | |
Size | 145 * 89 * 28 mm | 97 * 56 * 28 mm |
Splitters | ||
Standalone User Interface |
| Only GO button & Autoprogram status display |