Elprotronic Inc. programmers provide a number of beneficial features for manufacturing processes in addition to basic programming of internal flash memory. By using a single programmer you can achieve a significant reduction in the amount of additional hardware needed for production programming processes such as:
Single programmer allows parallel programming up to 6 MCUs,
Standalone programming feature makes it unnecessary to use a host computer,
Current and voltage measurements with high sensitivity and resolution make it possible to assess MCU operation in sleep mode and low power consumption.
Up to 64 Flash Programming Adapters (FPAs) can be connected to one PC,
Supports JTAG, cJTAG, SWD, SBW, BSL, SPI, UART communication interfaces (interface list depends on supported devices),
Programmable JTAG communication speed (if applicable) up to 20 MHz with Xstream-Iso and XstreamPro-Iso adapters and up to 4 MHz with USB-FPA adapter,
Transfer speed up to 1 MBytes/s with XStream-Iso and XStreamPro-Iso adapters and up to 50 kBytes/s with USB-FPA adapter,
Full memory or page memory erase capability,
Checksum verification,
No code size limitations,
Target device can be powered from the programming adapter or from external source,
Easy to use Windows™ based software. For XStream-Iso and XStreamPro-Iso adapters also Debian Linux support (amd64/armhf) . Also runs on Raspberry Pi,
Accepts TI (.txt), Motorola (.s19, *.s28, *.s37, .srec) and Intel (.hex) data files,
Lock setup capability, useful in production,
Software package can assign and automatically increment a serial number, model type and revision. Serial Number with or without an automatically inserted current date can be stored in Flash memory in HEX, BCD or ASCII format,
Library software package can control up to 64 FPAs from user application,
USB-2.0 Full-Speed to communication between PC and programming adapter. The XStreamPro-Iso adapter also provides communication via Ethernet,
Programming adapter has been fully tested to comply with FCC and CE requirements.