Versions Compared

Old Version 1

changes.mady.by.user Adam Czajkowski

Saved on

compared with

New Version Current

changes.mady.by.user Adam Czajkowski

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Plug in the FlashPro-ARM/GangPro-ARM Programmer to the PC USB Port, using provided cable extender (USB-A to USB-B).

  2. For Windows XP, Vista, 7, 8, 10. The "New hardware has been found - USB-FPA-BOOT" window should be displayed. Follow wizard instructions to install the drivers.

    1. In the first Wizard dialog screen (see Figure 3.1) select the "Yes, this time only" option.Figure 1: New Hardware Wizard, step 1. Select "Yes, this time only."

      Image Added

    2. In the second Wizard dialog screen (see Figure 3.2) select the "Install the software automatically (Recommended)" option and press NEXT button.Figure 2: New Hardware Wizard, step 2. Select "Install the software automatically.

      Image Added

    3. Software will search for the USB-FPA-BOOT driver. It can take a few minutes to find the necessary files. When the driver is found then the following warning will be displayed (Figure 3.3).Figure 3: New Hardware Wizard, step 3. Ignore this warning.

      Image Added

    4. Ignore this message and press button "Continue Anyway". The first USB-FPA-BOOT driver should be installed and the following message will be displayed (Figure 3.4).Figure 4: New Hardware Wizard, step 4. USB-FPA-BOOT driver installed.

      Image Added

    5. Press the "Finish" button.Figure 5: New Hardware Wizard, step5. USB-FPA (Elprotronic) driver installed.

      Image Added

      After a few seconds, a second "New hardware" window will appear regarding the adapter with the name (Elprotronic). Repeat procedures described above to install the Elprotronic driver (see Figure 3.5). If for any reason the wizard cannot find the USB driver's location then use the manual browse option to locate driver files in the software directory "C:\Program Files (x86)\Elprotronic\Drivers USB-FPA\XP,Vista,Win-7,8,10".
      For Windows 2000, 98-SE, ME. The "New hardware has been found" window will be displayed instead. Follow wizard instructions to install the drivers.

      1. Press "Next" when the Device Wizard Driver screen appears.

      2. Select the following option on the wizard screen: select a suitable driver for my device (recommended) and press "Next".

      3. Select the third option – "Specify a location" for a location of the driver files.

      4. In the application software directory "C:\Program Files (x86)\Elprotronic\Drivers USB-FPAnW2K, W98SE, WinME" and press "Next".

      5. Driver installation process will start.

  3. Driver installation procedures should be done twice to install two USB drivers - the Boot driver and the Application driver.

  4. Reboot computer if necessary.

...