Page Comparison

...

• Preparation of files and Hardware Secure Module (HSM) using the source code and the toolkit provided by STMicroelectronics. Three elements are necessary to perform an SSP sequence using Elprotronic Gangflasher-ST:

  • Signed file with secret data (*.ssp)

  • Signed TF-A SSP file (tf-a_ssp<custom board>.stm32)

  • HSM STM32HSM programmed module

• Programming of the OTP using Elprotronic Gangflasher and the files prepared in the first step.

...

1. Preparation of the keys (private_key.pem, public_key.pem and public_key_hash) using KeyGen Tool STM32MP_KeyGen_CLI

2. Preparation of Device Tree files (.dts) for the custom board using STM32CubeMX or STM32CubeIDE.

3. TFA-SSP compilation (tf-a_ssp<custom board>.bin) using Developers Package with SDK and Device Tree files from previous step.

4. Signing of the TF-A SSP (tf-a_ssp<custom board>.stm32) using STM32MP_SigningTool_CLI

5. Preparation of a secret data file (*.ssp) using STM32TrustedPackageCreator (SSP tab) or STM32TrustedPackageCreator_CLI (-ssp option)

6. Programming HSM modules with a limited number of licenses using STM32TrustedPackageCreator (HSM tab) or STM32TrustedPackageCreator_CLI (-hsm option)

2. Programming secrets in OTP using Elprotronic Gangflasher-ST on Windows

1. Open Gangflasher-ST

2. Check connection with the board or scan “Setup->USB Location“

3. Check connection with HSM “View->HSM“
   

   

4. Load TF-A SSP and *.ssp files in the setup window “Setup->SSP/SFI“
   

   

5. Check “Enable” box in SSP/SFI area.
   

   

6. Click “Write“ Button in SSP/SFI area.

7. Confirm the operation in the pop-up window.
   

   

8. View report for target in Reports area.
   

   

Gangflasher_CLI

Performing SSP operation requires specifying *.cfg configuration file and *.ssp and tfa-ssp files according to the command below

./GangFlasher-CLI -target_cfg <path to config file *.cfg> -ssp <path to secrets file *.ssp> -tfa_ssp <path to signed tf-a ssp file *.stm32>

Example:

./GangFlasher-CLI -target_cfg "setup.cfg" -ssp ssp.out -tfa_ssp tf-a-ssp-Signed.stm32

DLL

In order to customize the use of the SSP procedure, it is possible to use the Gangflasher API DLL. The SSP procedure requires the use of the following set of functions:

HSM card status check:

int F_Read_HSM(int slot);

uploading *.ssp file:

int F_LoadSSPFile(const char * FileName);

TF-A SSP file loading:

int F_LoadTFASSPFile(const char * FileName);

Start of the SSP procedure:

int F_TrustedWrite();

Possible Errors

    ======== Date:  27-JUL-2021      Time:  13:57:58 ========
******** Target 1   Starting process: ..... Trusted Programming .....  ********

SECRET SECURE PROVISIONING

Operation enabled by user

STEP 1: FILES VERIFICATION

	1. TF-A SSP File ready
	2. *.ssp File ready
	3. TF-A SSP file and *.out files are compliant

STEP 2: TARGET COMMUNICATION

Communication Initialization..........	 OK
Reading USB-1 descriptors...	 OK
   STMicroelectronics
   DFU in HS Mode @Device ID /0x500, @Revision ID /0x0000
   SN: 002E00453139510B38313636
Loading TF-A SSP files.......
   Loading file:  tf-a-ssp-stm32mp157c-ev1_Signed.stm32   (56.56 kB)...	 OK

	 2.1. TF-A SSP loaded
	 2.2. TF-A SSP detach and reset

Communication Initialization..........	 OK
Reading USB-1 descriptors...	 OK
   STMicroelectronics
   DFU in HS Mode @Device ID /0x500, @Revision ID /0x0000
   SN: 002E00453139510B38313636
Loading TF-A SSP files.......
   Loading file:  tf-a-ssp-stm32mp157c-ev1_Signed.stm32   (56.56 kB)...	 OK

	 2.3. TF-A SSP reloaded

STEP 3: REQUESTING CHIP CERTIFICATE

	3.1. Chip certificate request done
	3.2. Chip certificate is valid - 5000200A

 STEP 4. GENERATING A LICENCE

	 4.1 HSM Smard Card Reader communication results:

Requesting license for the current STM32 device 
Init communication with HSM 
P11 lib initialization Success! 
Opening session with slot ID 1... 
Succeed to Open session with HSM 
License Counter = 244
Succeed to generate license for current STM32 device 
Closing session with reader slot ID 1... 
Session closed with reader slot ID 1
Communication closed with HSM

	 4.2 License have been obtained
	 4.3 The license complies with the SSP

STEP 5: DOWNLOAD LICENCE TO MPU

	5.1 Licence downloaded
	5.2 DFU Detach
...	 done
 -------- D O N E --- ( run time =   4.9 sec.)

Related articles

Useful links

STMicroelectronics application notes and user manuals:

...