Page Comparison

Secure Secret Provisioning SSP is the final step in production programming and is designed to protect the MPU from unwanted access to registers or running unauthorized software. The SSP procedure is to write secret data and keys to the OTP using files properly prepared by the OEM. Elprotronic Gangflasher-ST -Gangflasher software offers the possibility to write OTP according to the SSP procedure developed by STMicroelectronics on many MPUs simultaneously (Gang programming) which is beneficial for the production of a large number of devices.

Instructions

...

The procedure consists of two main steps:
Preparation of files and Hardware Secure Module (HSM) using the source code and the toolkit provided by STMicroelectronics. Three elements are necessary to perform an SSP sequence using Elprotronic Gangflasher-ST:
Signed file with secret data (*.ssp)
Signed TF-A SSP file (tf-a_ssp<custom board>.stm32)
STM32HSM programmed module
Programming of the OTP using Elprotronic Gangflasher and the files prepared in the first step.

1. Preparing files using the STMicroelectronics toolkit:

Preparation of the keys (private_key.pem, public_key.pem and public_key_hash) using KeyGen Tool STM32MP_KeyGen_CLI
Preparation of Device Tree files (.dts) for the custom board using STM32CubeMX or STM32CubeIDE.
TFA-SSP compilation (tf-a_ssp<custom board>.bin) using Developers Package with SDK and Device Tree files from previous step.
Signing of the TF-A SSP (tf-a_ssp<custom board>.stm32) using STM32MP_SigningTool_CLI
Preparation of a secret data file (*.ssp) using STM32TrustedPackageCreator (SSP tab) or STM32TrustedPackageCreator_CLI (-ssp option)
Programming HSM modules with a limited number of licenses using STM32TrustedPackageCreator (HSM tab) or STM32TrustedPackageCreator_CLI (-hsm option)

2. Programming secrets in OTP using Elprotronic Gangflasher-ST on Windows

Open Gangflasher-ST
Check connection with the board or scan “Setup->USB Location“
Check connection with HSM “View->HSM“
Image Added
Load TF-A SSP and *.ssp files in the setup window “Setup->SSP/SFI“
Image Added
Check “Enable” box in SSP/SFI area.
Image Added
Click “Write“ Button in SSP/SFI area.
Confirm the operation in the pop-up window.
Image Added
View report for target in Reports area.
Image Added

Info
SSP operation is also capable using .dll and Gangflasher_CLI

Gangflasher_CLI

Performing SSP operation requires specifying *.cfg configuration file and *.ssp and tfa-ssp files according to the command below

Code Block
./GangFlasher-CLI -target_cfg <path to config file .cfg> -ssp <path to secrets file .ssp> -tfa_ssp <path to signed tf-a ssp file *.stm32>

Example:

Code Block
./GangFlasher-CLI -target_cfg "setup.cfg" -ssp ssp.out -tfa_ssp tf-a-ssp-Signed.stm32

DLL

In order to customize the use of the SSP procedure, it is possible to use the Gangflasher API DLL. The SSP procedure requires the use of the following set of functions:

HSM card status check:

Code Block
int F_Read_HSM(int slot);

uploading *.ssp file:

Code Block
int F_LoadSSPFile(const char * FileName);

TF-A SSP file loading:

Code Block
int F_LoadTFASSPFile(const char * FileName);

Start of the SSP procedure:

Code Block
int F_TrustedWrite();

Possible Errors

Expand

title	The SSP procedure consists of multiple steps and the result is returned in a report. An example of the correct execution of the entire SSP procedure generates the following report:

Code Block

    ======== Date:  27-JUL-2021      Time:  13:57:58 ========
******** Target 1   Starting process: ..... Trusted Programming .....  ********

SECRET SECURE PROVISIONING

Operation enabled by user

STEP 1: FILES VERIFICATION

	1. TF-A SSP File ready
	2. *.ssp File ready
	3. TF-A SSP file and *.out files are compliant

STEP 2: TARGET COMMUNICATION

Communication Initialization..........	 OK
Reading USB-1 descriptors...	 OK
   STMicroelectronics
   DFU in HS Mode @Device ID /0x500, @Revision ID /0x0000
   SN: 002E00453139510B38313636
Loading TF-A SSP files.......
   Loading file:  tf-a-ssp-stm32mp157c-ev1_Signed.stm32   (56.56 kB)...	 OK

	 2.1. TF-A SSP loaded
	 2.2. TF-A SSP detach and reset

Communication Initialization..........	 OK
Reading USB-1 descriptors...	 OK
   STMicroelectronics
   DFU in HS Mode @Device ID /0x500, @Revision ID /0x0000
   SN: 002E00453139510B38313636
Loading TF-A SSP files.......
   Loading file:  tf-a-ssp-stm32mp157c-ev1_Signed.stm32   (56.56 kB)...	 OK

	 2.3. TF-A SSP reloaded

STEP 3: REQUESTING CHIP CERTIFICATE

	3.1. Chip certificate request done
	3.2. Chip certificate is valid - 5000200A

 STEP 4. GENERATING A LICENCE

	 4.1 HSM Smard Card Reader communication results:

Requesting license for the current STM32 device 
Init communication with HSM 
P11 lib initialization Success! 
Opening session with slot ID 1... 
Succeed to Open session with HSM 
License Counter = 244
Succeed to generate license for current STM32 device 
Closing session with reader slot ID 1... 
Session closed with reader slot ID 1
Communication closed with HSM

	 4.2 License have been obtained
	 4.3 The license complies with the SSP

STEP 5: DOWNLOAD LICENCE TO MPU

	5.1 Licence downloaded
	5.2 DFU Detach
...	 done
 -------- D O N E --- ( run time =   4.9 sec.)