...
| Table of Contents | ||||
|---|---|---|---|---|
|
1. F_OpenInstancesAndFPAs
| Anchor | ||||
|---|---|---|---|---|
|
General Description
Multi API-DLL scans USB ports or LAN for connected FPAs listed in the setup file, or input string. When an FPA listed in the setup file is found, the corresponding API-DLL is copied on disk if necessary, and loaded. F_Initialization should be called for each FPA after this function succeeds.
...
All FPAs terminate communication with target devices and close target devices according to configuration settings (power setting, adapter line states, etc.). Finally, the USB/Ethernet connections to the FPAs are terminated and API-DLL instances are freed. The Multi API-DLL can now be used to open a new set of FPAs using the function F_OpenInstancesAndFPAs.
Syntax
| Code Block | ||
|---|---|---|
| ||
INT_X F_CloseInstances ( void ); |
Input
none.
Output
INT_X : success or failed
...
TRUE (1), used FPA index is valid
FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range
IMPORTANT
...
BYTE : current FPA index as set using F_Set_FPA_index
5. F_Check_FPA_index
| Anchor | ||||
|---|---|---|---|---|
|
General Description
Get current FPA index and check if index is valid. A valid index corresponds to an individual FPA that has been opened with F_OpenInstancesAndFPAs. If FPA index was set to 0 (all), then this function will only return 0, even if no FPAs are open. Does not indicate whether FPA index is enabled or disabled.
...
current FPA index as entered using F_Set_FPA_index if selected FPA has been opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs
FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range
6. F_Enable_FPA_index
...
INT_X type return value from last function call on selected FPA
FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range
9. F_Multi_DLLTypeVer
...
Code Block // return Type + Version // Type 0x6000 - Multi-FPA FlashPro430 // 0x7000 - Multi-FPA GangPro430 // 0x8000 - Multi-FPA FlashPro-CC // 0x9000 - Multi-FPA GangPro-CC // 0xC000 - Multi-FPA FlashPro2000 // 0xD000 - Multi-FPA GangPro2000 // 0x10000 - Multi-FPA FlashPro-ARM // 0x11000 - Multi-FPA GangPro-ARM // 0x17000 - Multi-FPA FlashPro-M // 0x18000 - Multi-FPA GangPro-M // Version = 0x0FFF & version
FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range
10. F_Get_FPA_SN
...
SN of selected FPA
FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range
11. F_Get_FPA_Label
...
updated FPA_LABEL structure pointed to by label input parameter
FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range
Example of printing FPA_LABEL:
...
value between 0 and 100
FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range
Example
...
PROG_OPCODE_VERIFY_ACCESS (1) : FPA is attempting to perform action described in F_Verify_Access to MCU.
PROG_OPCODE_FLASH_ERASE (2) : FPA is attempting to perform action described in F_Memory_Erase.
PROG_OPCODE_FLASH_BLANK_CHECK (3) : FPA is attempting to perform action described in F_Memory_Blank_Check.
PROG_OPCODE_FLASH_SELECTED_BLANK_CHECK (4) : FPA is attempting to perform action described in F_Memory_Blank_Check when a subset of the memory space is selected in configuration settings.
PROG_OPCODE_FLASH_WRITE (5) : FPA is attempting to perform action described in F_Memory_Write.
PROG_OPCODE_FLASH_VERIFY (6) : FPA is attempting to perform action described in F_Memory_Verify.
PROG_OPCODE_FLASH_READ (7) : FPA is attempting to perform action described in F_Memory_Read.
PROG_OPCODE_LOCK_MCU (8) : FPA is attempting to perform action described in F_Lock_MCU.
PROG_OPCODE_UNLOCK_MCU (9) : FPA is attempting to perform action described in F_Clear_Locked_Device.
PROG_OPCODE_START_APP (10) : FPA is attempting to run application programmed onto target device (if enabled to be ran after F_AutoProgram in configuration settings).
FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range
Example
| Insert excerpt | ||||||
|---|---|---|---|---|---|---|
|
15. F_
...
CancelAction
General Description
Function that will attempt to cancel any running Encapsulated Functions , like the GUI Cancel button. This function is thread-safe. One thread can call F_AutoProgram (for example) and another thread can call F_CancelAction to stop the first. A reinitialization is recommended using F_OpenInstancesAndFPAs after calling this function.
...