Page Comparison

...

After the following functions have been used to configure each FPA correctly for its target device, use Data Buffer Functions to determine what code should be written during programming. Finally, Encapsulated Functions can perform the process of programming, writing, erasing, verifying, etc., according to the aforementioned settings.

...

• any : based on input parameter

• -1 (0xFFFFFFFF) : invalid input parameter

• FPA_UNMATCHED_RESULTS (-1 or 0xFFFFFFFF) : Result of operation inconsistent across all selected FPAs, refer to Multi API-DLL Functions | F_LastStatus

• FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range

Example

7. F_Set_MCU_Name

...

 NULL all enabled lists on this adapter
 "Active-Semi"SPI Serial "Analog DevicesFlash"
 "Cypress"
 "Microchip/Atmel"
 "Marvell Tech."
 "Maxim Integrated"
 "Nordic Semiconductor"
 "NXP/Freescale"
 "Renesas"
 "Silergy"
 "Silicon Labs"
 "ST Microelectronics"
 "Texas Instruments-ARM"
 "Texas Instruments-Chipcon"

int mode : search mode

• 0, returns the first match to MCU_name_regex, a type (char *). Library will alloc and free this memory by itself, do not modify contents

• 1, returns the pointer to a list of matches to MCU_name_regex, a type (char **). Library will alloc and free this memory by itself, do not modify contents

...

• FALSE (0) : index parameter out of range

• TRUE (1) : index parameter set correctly

• FPA_UNMATCHED_RESULTS (-1 or 0xFFFFFFFF) : Result of operation inconsistent across all selected FPAs, refer to Multi API-DLL Functions | F_LastStatus

• FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range

Example

...

18. F_Get_Targets_Vcc

General Description

Get V_ccin millivolts as read from target device.

...

• FALSE (0) : failed - USB-FPA 6.1 adapter detected

• TRUE (1) : succeeded - XStream-Iso, and XStreamPro-Iso adapter detected

• FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range

Example

...

Refer to https://elprotronic.atlassian.net/wiki/spaces/FPGPARMFPGPM/pages/5777035896734779/Generic+Functions#F_Get_Power_Results

...

Refer to https://elprotronic.atlassian.net/wiki/spaces/FPGPARMFPGPM/pages/5777035896734779/Generic+Functions#F_Get_Power_Results

...

Refer to https://elprotronic.atlassian.net/wiki/spaces/FPGPARMFPGPM/pages/5777035896734779/Generic+Functions#F_Get_Power_Results

...

• FALSE (0) : failed - USB-FPA 6.1 adapter detected

• TRUE (1) : succeeded - XStream-Iso, and XStreamPro-Iso adapter detected

• FPA_INVALID_NO (-2 or 0xFFFFFFFE) : FPA not opened with Multi API-DLL Functions | F_OpenInstancesAndFPAs or index out of range

Example

...

General Description

Set state of the Reset, V_ccand JTAG lines after programming is finished.

...

• DEFAULT_JTAG_3ST (0) : JTAG lines set to tri-state

• DEFAULT_JTAG_HI (1) : JTAG lines set to V_cc

• DEFAULT_JTAG_LO (2) : JTAG lines set to GND

...

• DEFAULT_RESET_LO (0) : reset line set to GND

• DEFAULT_RESET_HI (1) : reset line set to V_cc

• DEFAULT_RESET_3ST (2) : reset line to tri-state

BYTE VccOn : set V_ccline from adapter

• 0 : set to tri-state

• 1 : set to configured V_cc(configuration parameter VccFromFPAin mV)

...