...
18. F_Get_Targets_Vcc
General Description
Get Vccin millivolts as read from target device.
...
General Description
Set state of the Reset, Vccand JTAG lines after programming is finished.
...
DEFAULT_JTAG_3ST (0) : JTAG lines set to tri-state
DEFAULT_JTAG_HI (1) : JTAG lines set to Vcc
DEFAULT_JTAG_LO (2) : JTAG lines set to GND
...
DEFAULT_RESET_LO (0) : reset line set to GND
DEFAULT_RESET_HI (1) : reset line set to Vcc
DEFAULT_RESET_3ST (2) : reset line to tri-state
BYTE VccOn : set Vccline from adapter
0 : set to tri-state
1 : set to configured Vcc(configuration parameter VccFromFPAin mV)
...