Versions Compared

Old Version 1

changes.mady.by.user Adam Czajkowski

Saved on

compared with

New Version 2

changes.mady.by.user Adam Czajkowski

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Table of Contents


The FlashPro-ARM M and GangPro-ARM M Programmer is designed to program the ARM series MCU devices 8-32 bit devices and SPI Flash Memory from multiple vendors. Depending on the programmer key the user purchased, the adapter will be able to program some or all available ARM MCUstargets.

2.1 General Features

General features of the FlashPro-ARM M and GangPro-ARM M programmer are:

  • Supports M0, M3, M4, and M7 8-32 bit devices from various vendors .USB-FPA 6.1 adapter: Programming speed can reach up to almost 100 KiB/s depending on hardware setup and selected MCU.and SPI Flash Memory

  • XStream-Iso and XStreamPro-Iso: Programming speed can reach up to 1 MiB/s depending on hardware setup and selected MCU.

  • Programmable Vcc from 1.2 V to 4.0 V using 0.1 V steps. Current supply up to 200 mA in total.

  • The GangPro-ARM M variant of the product can simultaneously program six(6) targets using one adapter if connected via a GangSplitter or compatible connector.

  • Our programmers are professionally made and are recommended by multiple vendors, such as Texas Instruments, ST Microelectronics, NXP Semiconductors and others, designed as Authorized Partners or Third Party Tools.

...