...
Blank check is enabled by default but can be disabled to save time by disabling configuration option https://elprotronic.atlassian.net/wiki/spaces/FPGPARM/pages/57802857/General+Configuration#EnableBlankCheck General Configuration | EnableBlankCheck .
The target device can be locked at the end of this procedure if https://elprotronic.atlassian.net/wiki/spaces/FPGPARM/pages/57770239/Memory + Protection +Overview#WriteLockingBitsEnConfiguration | WriteLockingBitsEn is enabled. Even if enabled, custom MCU protection bits need to be configured (check Memory Protection section in this Guide for your vendor)
...
Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).
...
Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).
...
Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).
...
Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).
...
INT X mode : for future use (currently has no effect)
Select FPA to perform operation on using operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).
...
Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).
...
Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).
...
Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).
...
Select FPA to perform operation on using Multi API-DLL Functions | F_Set_FPA_index, index 1 to 64. Use index 0 to perform operation on all FPAs (if results differ, use Multi API-DLL Functions | F_LastStatus to get individual results).
...